跳到步骤＃21
由 Miroslav Djuric — 编辑
编辑已通过 由 Miroslav Djuric
- 之前
- 之后
- 不变
步骤行
| [* black] [* green] Pressure contacts and cable connectors make the modular components (cameras, buttons, headphone jack and speakers) easy to replace. [* green] The Moto X uses a single type of screw, although it's a fairly uncommon size (T3). [* yellow] The taped-in battery is less accessible than we'd like (such as in a Samsung or Blackberry), but at least it's near the top of the stack once you get the rear cover off (unlike the HTC One). [* yellow] The digitizer is fused to the display, increasing repair costs for a cracked screen. But the display midframe can be separated, potentially lowering the cost of the replacement part. [* red] Sticky adhesive on the back cover is annoying and will slow opening the phone. |
| [* black] [* green] Pressure contacts and cable connectors make the modular components (cameras, buttons, headphone jack and speakers) easy to replace. [* green] The Moto X uses a single type of screw, although it's a fairly uncommon size (T3). [* yellow] The taped-in battery is less accessible than we'd like (such as in a Samsung or Blackberry), but at least it's near the top of the stack once you get the rear cover off (unlike the HTC One). [* yellow] The digitizer is fused to the display, increasing repair costs for a cracked screen. But the display midframe can be separated, potentially lowering the cost of the replacement part. [* red] Sticky adhesive on the back cover is annoying and will slow opening the phone. |
图片2
没有之前的图片
已添加