跳转到主内容

跳到步骤#2

revher编辑

编辑已通过 由 revher

已删除
已添加
不变

步骤行

[* black] The plastic will displace itself enough to let you slide the foot back in place. Snap the bottom plastic base back and you are done.
[* black] If the shape of the foot is not perfectly spherical as in the photo, this might be caused by the rubber flap that came out of the notch. Insert it back.
[* black] Once the plastic back is gently opened, insert the rubber, and center it.

图片3

旧版本

新版本