跳转到主内容

跳到步骤#6

Sam Goldheart编辑

编辑已通过 由 Sam Goldheart

之前
之后
不变

步骤行

[* black] Use the pointed end of a spudger to pry the volume control button assembly away from the edge of the case.
[* icon_caution] '''Do not'''
remove the volume rocker bracketcontrol button assembly from the devicedevice entirely, it is still connected to the logic board assembly by a soldered cable.
[* black] Use the pointed end of a spudger to pry the volume control button assembly away from the edge of the case.
[* icon_caution] '''Do not'''
remove the volume rocker bracketcontrol button assembly from the devicedevice entirely, it is still connected to the logic board assembly by a soldered cable.