跳转到主内容

跳到步骤#3

Sam Goldheart编辑

编辑已通过 由 Sam Goldheart

之前
之后
不变

步骤行

[* black] Insert a plastic opening tool under the sleep button, and gently pry upwards to free it from its adhesive.
-[* black] Slide the plastic opening tool along the underside of the ribbon cable.
-[* icon_note] Continue freeing the ribbon cable until you can access the volume buttons on the side of the device.
+[* black] Slide the plastic opening tool along the underside of the sleep button ribbon cable.
+[* icon_note] Continue freeing the ribbon cable until you can access the volume buttons on the left side of the rear case.