跳到步骤#1
由 Sam Goldheart — 编辑
编辑已通过 由 Sam Goldheart
- 之前
- 之后
- 不变
步骤行
- | [* black] Insert a spudger under the display |
---|---|
- | [* icon_note] Make sure that the spudger is under the entire display assembly, to prevent bending the metal |
- | [* black] Rotate the spudger around and across the |
+ | [* black] Insert a spudger under the metal midframe and display on the left side of the home button. |
+ | [* icon_note] Make sure that the spudger is under the entire display assembly, to prevent bending the metal midframe. |
+ | [* black] Rotate the spudger around the home button and across the front panel, releasing the adhesive holding the display in place. |