跳到步骤＃11
由 Kristen Gismondi — 编辑
编辑已通过 由 Kristen Gismondi
- 之前
- 之后
- 不变
步骤行
| - | [* red] Place the small metal |
|---|---|
| - | [* icon_note] Make sure the rubber grommet is |
| + | [* red] Place the small metal nuts back onto the screws and tighten them with a wrench. |
| + | [* icon_note] Make sure the rubber grommet is intact so that the wires do not backflow into the taillight. |