跳转到主内容

跳到步骤#1

Walter Galan编辑

编辑已通过 由 Walter Galan

之前
之后
不变

步骤行

-[* red] Remove the two 21 mm T10 Torx screws from the left-hand hard drive bracket.
-[* orange] Remove the single 9mm T10 Torx screw.
-[* yellow] Remove the 27 mm T10 Torx screw.
+[* black] Remove the following screws securing the hard drive bracket to the rear enclosure:
+ [* red] Two 21 mm T10 Torx screws from the left-hand hard drive bracket.
+ [* orange] One 9mm T10 Torx screw.
+ [* yellow] One 27 mm T10 Torx screw.