跳转到主内容

跳到步骤#5

wcmcdermott编辑

等待批准

之前
之后
不变

步骤行

[* black] The upper circuit board is held in place by another Phillips screw.
-[* black] After removing the screw, maneuver the upper board past the two metal clips holding it in place and lift it out of the phone body.
+[* black] After removing the screw, maneuver the upper board past the two plastic clips on either side holding it in place and lift it up from the phone body.
+[* black] Volume Control switch: Slide up and set aside.
[* black] The large black-coated foil section is the data connection between the two main circuit boards.