跳转到主内容

跳到步骤#4

Nick编辑

编辑已通过 由 Nick

已删除
已添加
不变

步骤行

[title] PushingPut the device intoin recovery mode
[* black] When theicon_note] The logo at this screen is firmware and device getsdependent. 30-pin devices show a screen that is similar to this while Lightning devices replace the male USB plug with a Lightning connector.
[* black] Once
the Apple logologo shows up on the screen, let go of the power button. KeepContinue holding the home button. Do thisbutton until the iPod comes up the screen shown.
[* icon_reminder] The iTunes icon will vary from device to device. On Lightning devices, you will see a Lightning cable rather then a USB cable
on the screenexample device appears.
[title] PushingPut the device intoin recovery mode
[* black] When theicon_note] The logo at this screen is firmware and device getsdependent. 30-pin devices show a screen that is similar to this while Lightning devices replace the male USB plug with a Lightning connector.
[* black] Once
the Apple logologo shows up on the screen, let go of the power button. KeepContinue holding the home button. Do thisbutton until the iPod comes up the screen shown.
[* icon_reminder] The iTunes icon will vary from device to device. On Lightning devices, you will see a Lightning cable rather then a USB cable
on the screenexample device appears.

图片1

旧版本

新版本

图片2

没有之前的图片

已添加