跳转到主内容

跳到步骤#2

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

+[* icon_reminder] The camera board has a small heat sink with thermal putty applied to its surface. Be sure the putty is evenly distributed on the heat sink before reinstallation.
+[* black] Slightly lift the camera board out of the outer case, being careful not to disturb the aluminum tape securing the camera cable to the outer case.
+[* black] Disconnect the camera cable by pulling its connector away from the socket on the camera board.

图片1

没有之前的图片

已添加