跳转到主内容

跳到这一步

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

-[* black] Install your new hard drive in the external enclosure.
-[* black] Connect the enclosure to your Mac.
-[* icon_note] If the installation of the new drive has already been completed; this process can be continued by connecting the original hard drive to the enclosure, and holding 'Option' when powering on the computer to boot from the original hard drive.
+[* black] You will need to put the new drive into the 2.5" enclosure in order to clone your existing hard drive onto it.
+[* black] Before inserting the new hard drive, note the orientation of the SATA connectors embedded in the enclosure:
+ [* red] The wide power SATA port
+ [* orange] The narrower data SATA port

图片1

旧版本

新版本

图片2

没有之前的图片

已添加