跳到步骤＃4
由 James Snyder — 编辑
编辑已通过 由 James Snyder
- 之前
- 之后
- 不变
步骤行
| - | [* black] Tie the knot by wrapping it behind itself and loop the end underneath the opening twice before pulling it tight. |
|---|---|
| + | [* black] To tie the knot, start by wrapping the string back over the bridge and behind itself. |
| + | [* black] Put the end of the string through the opening created above the bridge. |
| + | [* black] While holding the string taut, loop the end through the opening again so it looks like it's wrapped around itself. |
| + | [* black] Two loops is enough for the 3 low strings, but for the 3 higher strings try to get 3 loops to make sure they stay secure. |
| + | [* black] Pull the long end of the string away from the bridge to tighten the knot. |