跳转到主内容

跳到步骤#9

kevinleroy编辑

编辑已通过 由 kevinleroy

之前
之后
不变

步骤行

[* black] Remove 14 retaining screws from back
[* black] The first 9 are required for bezel and touchpad removal .
[* black] M2 × 14 mm, wafer-head, nylon-coated (6)
[* black] M2 × 3 mm, wafer-head, nylon-coated (3)
[* black] The remaining need to be removed for base cover removal
[* black] M2 × 5 mm, wafer-head, nylon-coated (4)
[* black] M2 × 10 mm, wafer-head, nylon-coated (1)
+[* black] Note: The FPC cable is attached on the underside of the keyboard bezel assembly. In some models, the Bluetooth daughter card is also attached on the underside of the keyboard bezel assembly.