跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#30

Jeff Snyder编辑

编辑已通过 由 Jeff Snyder

之前
之后
不变

步骤行

[* black] Blast the front panel with heat and pry between the display assembly and front panel bezel, working one or several guitar picks around the display assembly.
[* black] Once the display assembly is loosened from the front panel, it will fall away.
[* blue] The front glass came off easily, but the digitizer was much more difficult to remove. The adhesive holding together the display assembly is much weaker than the adhesive holding the display assembly to the front panel.
[* icon_note] While creating this guide, I utterly destroyed the front panel bezel and digitizer. Replacing the display assembly was a breeze--but removing the digitizer required nearly a dozen reheats of the front panel. To replace the bezel, you will need a new "mid chassis" (that's the front panel piece the digitizer is so powerfully glued to).

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加