跳转到主内容

跳到步骤#3

iRobot编辑

等待批准

之前
之后
不变

步骤行

+[* black] Remove the following 7 screws from the edges of the keyboard area.
+ [* red] Three 2 mm Phillips along the right edge.
+ [* orange] One 4.5 mm Phillips underneath where the magnet was.
+ [* yellow] One 6 mm Phillips with a small head in the lower left corner.
+ [* green] Two 6 mm Phillips with large heads, one in the upper left corner and one in the middle

图片1

没有之前的图片

已添加