菜单

你的设置

跳到步骤＃1

由 Henry H — 编辑

编辑已通过 由 Henry H

已删除
已添加
不变

步骤行

[* black] Take offRemove the cup fillerspout by pushingpressing the releasebuttonbutton on toptop and sliding it towards you.
[* black] Unscrew the two PH#1 screws on the back of the spout.
[* black] Push a little and the cup filler opensThe spout halves should now separate easily but light prying might be necessary.
[* black] Take offRemove the cup fillerspout by pushingpressing the releasebuttonbutton on toptop and sliding it towards you.
[* black] Unscrew the two PH#1 screws on the back of the spout.
[* black] Push a little and the cup filler opensThe spout halves should now separate easily but light prying might be necessary.