跳转到主内容

跳到步骤#7

Adam O'Camb编辑

编辑已通过 由 Adam O'Camb

之前
之后
不变

步骤行

+[* black] Place the spring plate on the backing plate.
+[* icon_caution] Be very careful not to move the heat sink while you install the screws.
+[* black] Carefully thread one of the CPU heat sink screws slightly into the heat sink so that just a couple threads are engaged.
+[* black] Press down on the opposite corner of the spring plate from where you just installed a screw.
+[* black] While holding the corner down, thread another screw into that corner of the heat sink, again just tightening it until a couple threads are engaged.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加