跳到这一步
由 Delia Padilla — 编辑
编辑已通过 由 Delia Padilla
- 之前
- 之后
- 不变
步骤行
| [* icon_caution] ***Practice safety precaution!*** | |
| - | [* black] Locate the tab connecting the battery to the board. Carefully pull inwards, towards the battery. |
| - | [* black] After removing the cable, peel off the adhesive tab holding the cable to the device. |
| [* icon_note] ''***Usage of non-conductive tweezers are recommended***'' | |
| + | [* black] If you need to remove the base cover, please refer to this manual [guide|155026|here|new_window=true]. |