跳转到主内容

跳到步骤#2

Jeff Suovanen编辑

编辑已通过 由 Jeff Suovanen

之前
之后
不变

步骤行

-[* black] Use the flat end of a spudger to pry the microphone off the adhesive securing it to the left side of the upper case. ***NOTE*** - Using a little heat will help loosen the adhesive.
+[* black] Use the flat end of a spudger to pry the microphone off the adhesive securing it to the left side of the upper case.
+ [* black] If needed, apply a little heat from an iOpener or hairdryer to soften the adhesive.
[* black] Remove the microphone from the upper case.