跳到步骤＃10
由 Andrew Bookholt — 编辑
- 之前
- 之后
- 不变
步骤行
| [* red] Remove the single 7 mm Phillips screw securing the display data cable retainer to the upper case. [* icon_note] This screw may remain captive in the display data cable ground loop. If replacing the display, be sure to transfer this screw to the new unit. [* black] |
| [* red] Remove the single 7 mm Phillips screw securing the display data cable retainer to the upper case. [* icon_note] This screw may remain captive in the display data cable ground loop. If replacing the display, be sure to transfer this screw to the new unit. [* black] |
图片1
旧版本
新版本