跳到步骤＃13
由 Ben Eisenman — 编辑
- 之前
- 之后
- 不变
步骤行
| [* black] Remove the following screws: [* red] Eight 3.5 mm T6 Torx screws securing the logic board to the upper [* red] Seven 3.5 mm Phillips screws |
| [* black] Remove the following screws: [* red] Eight 3.5 mm T6 Torx screws securing the logic board to the upper [* red] Seven 3.5 mm Phillips screws |
| [* orange] Two T6 Torx screws securing the DC-In board to the upper case. |
| [* icon_caution] Do not remove the logic board yet! There are connectors attached to the underside of the logic board that must first be disconnected. |
图片1
旧版本
新版本