跳到步骤＃20
由 Alex Diaz-Kokaisl — 编辑
编辑已通过 由 Alex Diaz-Kokaisl
- 之前
- 之后
- 不变
步骤行
| + | [title] Separate the bottom adhesive |
|---|---|
| + | [* black] Insert a new opening pick into the gap you just created on the bottom edge of the iPad. |
| + | [* black] Slide the pick over the antenna, stopping just before the home button. |
| + | [* icon_caution] Only slide the pick towards the home button and not away from it, as you may damage the antenna. |
| + | [* icon_note] If you need to slide the pick over this section again, remove and re-insert it at the bottom-left corner. |
| + | [* black] Leave the pick to the left of the home button before continuing. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加