跳到步骤＃7
由 Alex Diaz-Kokaisl — 编辑
编辑已通过 由 Alex Diaz-Kokaisl
- 之前
- 之后
- 不变
步骤行
| + | [title] Separate the left adhesive |
|---|---|
| + | [* black] Insert a second opening pick into the gap you just created. |
| + | [* black] Slide the pick toward the bottom-left corner of the device to separate the adhesive. |
| + | [* black] Leave the pick in the bottom-left corner to prevent the adhesive from re-sealing. |
| + | [* icon_note] Don't worry if you can see [link|https://guide-images.cdn.ifixit.com/igi/5VJupf6KUaelCaGP.full|the opening pick through the digitizer|new_window=true]—just pull the pick out. The LCD screen shouldn't be damaged, but you risk leaving behind hard-to-clean adhesive. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加