跳到步骤＃6
由 Alex Diaz-Kokaisl — 编辑
编辑已通过 由 Alex Diaz-Kokaisl
- 之前
- 之后
- 不变
步骤行
| + | [title] Insert an opening pick |
|---|---|
| + | [* icon_note] If your display is badly cracked, [guide|140533|covering it with a layer of clear packing tape|new_window=true] may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen. |
| + | [* black] Once the screen is warm to touch, apply a suction handle to the left edge of the screen and as close to the edge as possible. |
| + | [* black] Lift the screen with the suction handle to create a small gap between the digitizer and the frame. |
| + | [* black] Insert an opening pick into the gap between the digitizer and the frame. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加