跳转到主内容

跳到步骤#3

Walter Galan编辑

编辑已通过 由 Walter Galan

之前
之后
不变

步骤行

-[* black] Use the tip of a spudger to flip up the retaining flap securing the microphone ribbon cable to the I/O board.
-[* black] Use the tip of a spudger to remove the volume button ribbon cable from its ZIF connector on the I/O board.
+[* black] Use the tip of a spudger to carefully flip up the retaining flap on the microphone ribbon cable ZIF socket.
+[* icon_caution] Make sure you are flipping up the retaining flap, ***not*** the socket itself.