跳到步骤＃2
由 Alex Diaz-Kokaisl — 编辑
编辑已通过 由 Alex Diaz-Kokaisl
- 之前
- 之后
- 不变
步骤行
| [title] Flip the LCD over | |
| - | [* icon_caution] Don't attempt to fully remove the LCD during this step, as it's still connected by several cables at the home button end. |
| - | [* icon_caution] Only lift the LCD from the front-facing camera end. |
| + | [* icon_caution] Don't attempt to fully remove the LCD during this step, as it's still connected by a flex cable. |
| [* black] Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers. | |
| - | [* black] Flip the |
| - | [* black] Lay the LCD |
| + | [* black] Flip the LCD like a page in a book, lifting near the camera and turning it over the home button end of the frame. |
| + | [* black] Lay the LCD on a clean, soft, lint-free surface to allow access to the display cables. |