跳到步骤＃2
由 Alex Diaz-Kokaisl — 编辑
编辑已通过 由 Alex Diaz-Kokaisl
- 之前
- 之后
- 不变
步骤行
| + | [* black] Slide an opening pick underneath the home button cable to separate it from the front panel. |
|---|---|
| + | [* black] Gently slide it forward to cut through the adhesive securing the home button cable to the front panel. |
| + | [* icon_note] If the adhesive is stubborn, don't force the pick. Lightly heat the home button cable using an iOpener or a hair dryer to soften the adhesive. |
| + | [* black] Continue sliding the opening pick until you reach the home button bracket. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加