跳转到主内容

跳到步骤#4

Christian Zavala编辑

编辑已通过 由 Christian Zavala

之前
之后
不变

步骤行

-[* black] Pry off the front plate by applying pressure to the tabs located near the front of the device. Use the flat end of a spudger to do so.
- [* icon_caution] These tabs are very easy to break. However, the device works exactly the same without the tabs.
-[* black] Finally, open the front plate like a book, being careful to watch for small parts that may fall out.
+[* black] With the flat end of a spudger apply pressure to the tabs located on left side of the control.
+ [* icon_note] These tabs are very easy to break. If tabs are broken, control will still function.
+[* black] Open the front plate like a book. Be careful for small parts that might fall out.