跳到步骤＃6
由 BoulderMaker — 编辑
编辑已通过 由 BoulderMaker
- 之前
- 之后
- 不变
步骤行
| + | [title] Remove Back Enclosure Cover |
|---|---|
| + | [* black] With all six T10 screws unfastened, you can flip off the back cover. The back cover has a small daughter board for the mute switch connected by a small flex cable. Rotate the cover up towards the top of the device so as not to put any strain on the flex cable. |
| + | [* black] Carefully disconnect the flex cable. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加