跳转到主内容

跳到步骤#13

Chris Green编辑

等待批准

之前
之后
不变

步骤行

[* black] Removing the power supply
[* black] Disconnect the power connector from the logic board (this looks alot like a standard ATX connector, but I have yet to test the voltages)
[* black] There is a 4-Pin Cable connected to the front panel box, remove it.
[* black] Disconnect the internal fan cable.
[* red] The Fan Connector
[* black] Than Route all of the cables up through the case to the level of the power supply

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加