跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#11

Emily Waters编辑

编辑已通过 由 Emily Waters

之前
之后
不变

步骤行

[* black] 13. PullPull the two halves of the device apart to disconnect the second (wider) ribbon connector.
[* blackicon_note] Note: The ribbon connector is bonded to the logic board with adhesive, simply pull it offto remove it completely.
[* black] 13. PullPull the two halves of the device apart to disconnect the second (wider) ribbon connector.
[* blackicon_note] Note: The ribbon connector is bonded to the logic board with adhesive, simply pull it offto remove it completely.