跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#11

Mustapha Nadri编辑

编辑已通过 由 Mustapha Nadri

之前
之后
不变

步骤行

[* black] 13. Pull the two halves of the device apart to disconnect the second (wider) ribbon connector. a. Note
[* black] Note
: The ribbon connector is bonded to the logic board with adhesive, simply pull it off
[* black] 13. Pull the two halves of the device apart to disconnect the second (wider) ribbon connector. a. Note
[* black] Note
: The ribbon connector is bonded to the logic board with adhesive, simply pull it off