跳转到主内容

跳到步骤#1

Aar编辑

编辑已通过 由 Aar

已删除
已添加
不变

步骤行

[* red] Removeblack] Using the Phillips #00 Screwdriver, unscrew the 4mm screws from the rightmost circuitboard (remember to save these screws for reassembly!)circuit board.
[* black] CarefullyUsing your fingers, carefully pull the circuitboardcircuit board away from side of device base.
[* red] Removeblack] Using the Phillips #00 Screwdriver, unscrew the 4mm screws from the rightmost circuitboard (remember to save these screws for reassembly!)circuit board.
[* black] CarefullyUsing your fingers, carefully pull the circuitboardcircuit board away from side of device base.