修复你的物品 社区 商店

跳到步骤＃6

由 tayola — 编辑

编辑已通过 由 Alex Diaz-Kokaisl

之前
之后
不变

步骤行

[title] Remove Sub-Board Connectors
-[* black] Use a spudger to remover the connectors for the display, fingerprint sensor and main-sub board.
-[* black] The fingerprint sensor can be pried from the side to release it and remove it.
-[* black] Remove the retaining screw for the sub-board.
-[* black] Use a spudger to pry the sub-board loose.
-[* black] Once loose, pry the cables up to release them from the channel going up the side of the frame.
+[* red] Use a spudger to remover the connectors for the display, fingerprint sensor and main-sub board.
+[* red] The fingerprint sensor can be pried from the side to release it and remove it.
+[* red] Remove the retaining screw for the sub-board.
+[* red] Use a spudger to pry the sub-board loose.
+[* red] Once loose, pry the cables up to release them from the channel going up the side of the frame.
[* black] Once the board and cables are loosened, the mainboard, sub-board and cables can all be removed together. This is one possibility, if you are not comfortable trying to remove everything with the cables still attached, then disconnect the cables from the sub-board and mainboard first.