跳转到主内容

跳到步骤#1

Melissa Pavelka编辑

编辑已通过 由 Marty Rippens

已删除
已添加
不变

步骤行

[* red] Remove the T8 Torx screw securing the metal shield to the case.
[* icon_note] In order toTo remove the T8 screw, you must insert the screwdriver through the access hole in the metal shield,shield. The access hole is located near the PRAM battery.
[* icon_note] In order toTo remove the T8 screw, you must insert the screwdriver through the access hole in the metal shield,shield. The access hole is located near the PRAM battery.