Skip to main content

Changes to Step #2

Edit by Walter Galan

等待批准

Deleted
Added
Unchanged

Step Lines

[* black] There areRemove the following three screws you needsecuring the power supply to removethe upper case:
[* red] One 4.8 mm T8 Torx screw next to bar code sticker.
[* greenorange] Two 5.8 mm T8 Torx screws holding power supply to logic board.
[* black] There areRemove the following three screws you needsecuring the power supply to removethe upper case:
[* red] One 4.8 mm T8 Torx screw next to bar code sticker.
[* greenorange] Two 5.8 mm T8 Torx screws holding power supply to logic board.

Image 1

Old Version

New Version