跳转到主内容

Changes to Step #2

Edit by Celerityblur

等待批准

已删除
已添加
不变

步骤行

[* black] Unscrew the secondThere are three screws you need to remove
[* red] One 4.8 mm T8 Torx
screw next to bar code sticker.
[* green] Two 5.8 mm T8 Torx screws holding power supply to logic board.
[* black] Unscrew the secondThere are three screws you need to remove
[* red] One 4.8 mm T8 Torx
screw next to bar code sticker.
[* green] Two 5.8 mm T8 Torx screws holding power supply to logic board.

Image 1

旧版本

新版本