修复你的物品 社区 商店

跳到步骤＃5

由 Craig Lloyd — 编辑

编辑已通过 由 Craig Lloyd

之前
之后
不变

步骤行

-[* black] Camera bump is sealed to the back glass (another place for water to get in) but is replaceable along with each lens
- [* black] Camera bump is attached to the back cover via an adhesive gasket. Good news: you can replace just the glass back cover. You can even replace just the camera lens!
-[* black] Even though this phone is big, a mini toolkit (or "minnow-sized toolkit") still gets the job done
+[* black] Unlike previous Galaxy S models, the entire camera bump can be removed and replaced, connected only to the rear panel with a thin adhesive gasket and a small lip to rest on.
+ [* icon_note] Contrary to the rear panel, the camera bump is made of metal, so it won't crack or shatter if you drop it. The lenses themselves are glass, however, but those can be individually replaced.
+[* black] Even though this phone is humongous, our tiny [product|IF145-474-1|Minnow Driver Kit] still gets the job done. Proving that it's not the size of the toolkit that matters, but how you use it.
[* black] Interals vs [link|https://d3nevzfk7ii3be.cloudfront.net/igi/QcERlBwo2m1ir2rF.full|the S20 internals]
[* black] The earpiece [link out to photo 74] comes out with the antenna assembly / upper shield, as opposed to it being adhesive-d to the frame in the S20U