跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#4

Walter Galan编辑

等待批准

之前
之后
不变

步骤行

[* icon_note] This is a diagram of the ribbon clamp connectors you will disconnect in the next step.
[* black] 1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16" or 2 mm).
[* black] 2) After disengaging the locking bar, slide the cable out of the connector.
[* black] 1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16" or 2 mm).
[* black] 2) After disengaging the locking bar, slide the cable out of the connector.