跳转到主内容

跳到步骤#5

jwyoung编辑

等待批准

之前
之后
不变

步骤行

[* black] Remove the cover for the Expansion Bay.
[* black] If you utilize your expansion bay for its intended purpose, make sure you remove the component now.
[* black] Pull the ''inards'' out and away from the bottom cover.
[* black] Now that all of that bulky plastic is out of the way, we can get to the fun stuff - electronics!
[* red] Let's begin by removing the four 7.6mm Phillips head gold screws holding on the power supply board.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加