跳转到主内容

跳到步骤#5

Walter Galan编辑

等待批准

之前
之后
不变

步骤行

[* icon_remindericon_caution] If you utilize yourthere is a device occupying the expansion bay for its intended purposebay, make sure youto remove the component nowdevice. The expansion base should be '''empty'''.
[* black] RemovePry and remove the expansion bay cover for the expansion bay.
[* black] Pull the ''innards'' out and
away from its posts on the bottom cover.
[* black] Now that all of that bulky plastic is out of the way, we can get to the fun stuff - electronics!
[* red] Let's begin by removing the four 7.6 mm Phillips head gold screws holding on the power supply board
case.
[* icon_remindericon_caution] If you utilize yourthere is a device occupying the expansion bay for its intended purposebay, make sure youto remove the component nowdevice. The expansion base should be '''empty'''.
[* black] RemovePry and remove the expansion bay cover for the expansion bay.
[* black] Pull the ''innards'' out and
away from its posts on the bottom cover.
[* black] Now that all of that bulky plastic is out of the way, we can get to the fun stuff - electronics!
[* red] Let's begin by removing the four 7.6 mm Phillips head gold screws holding on the power supply board
case.

图片2

已删除

图片3

已删除