跳到步骤＃1
由 Jeff Suovanen — 编辑
编辑已通过 由 Jeff Suovanen
- 之前
- 之后
- 不变
步骤行
| [* icon_note] The home button assembly is attached to the front panel with some adhesive. The use of an iOpener to soften the adhesive is highly recommended. | |
| - | [* black] Place the iOpener in the microwave and microwave it for ***one minute*** on the highest power setting. |
| + | [* black] Place the iOpener in the microwave and microwave it for ***one minute*** on the highest power setting (or just ***thirty seconds*** if you're using the [guide|25705|newer gel-filled iOpener|new_window=true]). |
| [* icon_caution] Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener. | |
| [* black] Place the iOpener over the home button on the front edge of the display. |