跳转到主内容

跳到步骤#9

Austin Blakely编辑

编辑已通过 由 Austin Blakely

之前
之后
不变

步骤行

-[* black] Using the Phillips #00 screwdriver, remove the four screws holding the Camera mechanism in place. Once unscrewed, the entire section can be picked up by hand. The camera is free to be replaced at this point.
+[* black] Using the Phillips #00 screwdriver, remove the four screws holding the camera mechanism in place.
+[* black] Lift the camera assembly out of the case.