跳转到主内容

跳到步骤#4

Austin Blakely编辑

编辑已通过 由 Austin Blakely

之前
之后
不变

步骤行

-[* black] With all screws removed, the top and bottom half of the AEE Mach 1 can now be separated. This may require the use of a Spudger to pry, as the four legs have two snap points on each.
+[* black] Gently pry open the top panel of the drone using a spudger.
+ [* icon_note] Do not completely remove the panel, as there will still be wired connections between the two halves.
+[* black] Rotate the top panel slightly to reveal the four screws beneath each propellor arm.
+[* black] Remove each of the four screws with a Phillips #0 screwdriver.
+[* black] Lift off the top panel, as it should now be free from the rest of the device.