跳转到主内容

跳到步骤#4

Austin Blakely编辑

编辑已通过 由 Austin Blakely

之前
之后
不变

步骤行

[* black] Gently pry open the top panel of the drone using a spudger.
[* icon_note] Do not completely remove the panel, as there will still be wired connections between the two halves.
[* black] Rotate the top panel slightly to reveal the four screws beneath each propellor arm.
-[* black] Remove each of the four screws with a Phillips #0 screwdriver.
+[* red] Remove each of the four screws with a Phillips #0 screwdriver.
[* black] Lift off the top panel, as it should now be free from the rest of the device.

图片1

旧版本

新版本