跳转到主内容

跳到步骤#6

Adam O'Camb编辑

编辑已通过 由 Adam O'Camb

之前
之后
不变

步骤行

+[* black] Remove the following screws securing the logic board:
+ [* red] Two 23.7 mm T8 screws
+ [* orange] One 20.1 mm T25 spacer screw
+ [* yellow] One 17.6 mm T8 screw
+ [* green] One 7.2 mm T8 screw
+ [* light_blue] Three 7.1 mm T8 screws
+ [* blue] One captive T8 screw
+ [* icon_note] This screw is beneath a hole in the logic board. You may need a fixed screwdriver or the 60 mm extension from an iFixit driver kit to reach it.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加