跳转到主内容

跳到步骤#4

Apurva Patel编辑

编辑已通过 由 Apurva Patel

已删除
已添加
不变

步骤行

[* black] The screen is now connected only by a small cable that runs to the backrear board of the computercamera. Using tweezers, slowly pull the cable out of the connector.
[* black]
For best results, grip the cable as close to the connector as possible.
[* black] The screen is now connected only by a small cable that runs to the backrear board of the computercamera. Using tweezers, slowly pull the cable out of the connector.
[* black]
For best results, grip the cable as close to the connector as possible.
[* black] The screen should now be separate from the camera body. Be careful not to harm the connectors on the lens so it will reconnect successfully.