跳转到主内容

跳到步骤#4

Greg H编辑

编辑已通过 由 Greg H

已删除
已添加
不变

步骤行

[* black] Gently pull the wide ribbon cable from the front of the camera to the back using tweezers.
[* black] The screen is now connected only by a small cable that runs to the back board of the computer. Using tweezers, slowly pull the cable out of the connector. For best results, grip the cable as close to the connector as possible.
[* black] The screen should now be separate from the camera body. Be careful not to harm the connectors on the lens so it will reconnect successfully.