跳转到主内容

跳到步骤#14

Arthur Shi编辑

编辑已通过 由 Arthur Shi

之前
之后
不变

步骤行

[* red] If you are installing adhesive on a 2015 and newer iMac, the microphone notch in the adhesive must be aligned over the iMac's microphone hole without covering it.
[* black] If your iMac does not have a microphone hole, align the right end of the strip such that the L-bend [https://d3nevzfk7ii3be.cloudfront.net/igi/1wctDT3SgQEG5VMZ.full|sits next to the right vertical adhesive|new_window=true].*** The L-bend should not overlap the right vertical adhesive. ***
[* black] Align the adhesive strip to the bottom edge by aligning the microphone notch to the microphone hole.
- [* orange] The microphone hole is [https://d3nevzfk7ii3be.cloudfront.net/igi/aLbbiARyWsfqjDAw.full|the center hole|new_window=true] surrounded by two other holes.
+ [* orange] The microphone hole is [https://d3nevzfk7ii3be.cloudfront.net/igi/NZgoACQ4lS2VM2Gi.full|the center hole|new_window=true] flanked by two larger holes.
[* icon_note] The adhesive tears easily. Be careful not to pull on the strip with too much force.
[* black] Once you have aligned the strip, carefully set the left exposed edge onto the iMac to secure the alignment.