## 跳到步骤＃14

Arthur Shi编辑

### 步骤行

- [* red] The bottom right adhesive strip contains a microphone notch. This notch must be aligned over the iMac's microphone hole. [* black] Align the adhesive strip to the bottom edge by using the microphone notch. [* icon_note] The adhesive stretches easily. Be careful no to pull on the strip with too much force. [* black] Carefully set the left edge of the strip onto the iMac to secure the alignment. [* red] The strip you are about to install contains a microphone notch. This notch must be aligned over the iMac's microphone hole without covering it. [* black] Align the adhesive strip to the bottom edge by aligning the microphone notch to the microphone hole. [* orange] The microphone hole is [https://d3nevzfk7ii3be.cloudfront.net/igi/aLbbiARyWsfqjDAw.full|the center hole|new_window=true] surrounded by two other holes. [* icon_note] The adhesive tears easily. Be careful not to pull on the strip with too much force. [* black] Once you have aligned the strip, carefully set the left exposed edge onto the iMac to secure the alignment.